Haochen20 years of focus on multimode cavities and small spacing hot runner

What is the role of the hot runner system in forming oversized products?

hot runner systemIt is necessary to use a hot runner to make the plastic flow~for example, car lining panels, balance bars,..., etc., which require multiple locations to be poured simultaneously.

Lateral injection deviating from the center of the injection molding machine

Pouring through a hot runner will make the mold structure simple, easy to form, accelerate the forming speed, and reduce the material head during forming... all at once.

Disadvantages of the three board mold:

(1) During each injection of the three board method, the heavy mother template must slide on the guide pin, even if it is suitable during the new product period, the mold life is not long.

(2) During each ejection of the three board method, the movement of the vertical sprue removed from the mold is greater than the necessary template movement required to remove the formed product from the mold.

Used when pouring from the top out side

It can avoid problems caused by too long material heads, such as reducing mold stroke, saving material head residue, easy forming, no shrinkage, no flow marks, etc.

For some large or centrally poured products

(1) Hot runner can be used to replace the three plate mold to avoid unnecessary movement of the forming machine template.

(2) In the use of three plate molds, the mother template needs to be moved to remove the material head. If the hot runner forming method is used, the opening movement can shorten the necessary movement for unloading the material head, thus increasing the thickness of the mold. When the traditional method requires a large forming machine to produce, a small forming machine can be used after using the hot runner.

4. Effectively reduce the internal stress of the product and improve the stability of the product.